Filter
Top Products
Operating Modes
Once the CM-HS1 has been paired to a phone, it will enter either Listening
or Connected mode.
In Listening mode the CM-HS1 will be available to establish a connection
to any of the paired devices in response to an incoming call. This is
typical of phones connected as a Headset.
In Connected mode, the CM-HS1 is connected to a particular phone and
communication to another paired phone is not possible. In this mode the
CM-HS1 will respond quicker however most phones have a timeout that
drops out of Connected Mode after a few minutes.
See your phone owner’s manual for details on the operation.
Connection
Basically, after pairing process, a Bluetooth connection is established
between your mobile-phone and the CM-HS1 module when the ignition
of your vehicle is switched on.
Some phone model may require to you activate this connection by
pressing a short time the CM-HS1 answering button.
Making a call
There are different ways to make a call.
Calling with the phone’s keypad
1. Using the phone keypad, dial the phone number.
2. Press the phone “send” key - the phone is now connected to the
module and your car stereo system will be mute. Talk normally to the
module, the person you’re talking to will be heard through your car
speaker.
Using your CM-HS1
10 BLT433
English