Filter
Top Products
Call-waiting
Some mobile phones allow you to accept another incoming call while
you are using your module. This feature varies, dependent on mobile
service provider and phone model. If you normally hear a beep on your
mobile phone, you will still hear this beep through your car speaker or
external speaker. If your phone’s service support this feature, you can
use either your phone’s keypad or your module. To use your phone’s
keypad
(
recommended
)
, you can switch between calls using the standard
method as specified by your phone manufacturer. To use the module to
switch between calls, briefly press your module’s “Answer” button once.
As with your phone controls, you may then return to the initial call by
briefly pressing the “Answer” button once more.
Adjusting the volume
You can adjust the speaker volume in a call via your module.
To increase the volume, press the button.
To decrease the volume, press the button.
Note: Use the and controls to adjust the telephone call reception volume
and minimise any echo generated.
Using headset and car handsfree
Phones that support Connected Mode require the user to initiate the
connection. To do this, turn the ignition on and initiate the connection
from the phone or by press the Answer button.
Note: If you have an ongoing call in your Bluetooth
®
headset, and enter the car
and wish to continue your conversation in the car handsfree, you must
transfer the sound to the car handsfree. See “Transferring a call”.
Using your CM-HS1
13BLT433
English