Filter
Top Products
12 DB265MP
280-8303-00
English
Auto store function
(Automatic Station Store)
1. Press [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the [ ] button for 1 second
or longer. The stations at which the reception
is the strongest will be automatically stored
in the memory.
Notes:
• When the auto store is performed, the station
previously store in the memory at that position is
overwritten.
• When the number of stations stored is less than
six, the previous content of the memory for each
direct button will be retained.
Preset scanning
(Preset Station Scan)
When the [ ] button is pressed, the “SCN” will
be indicated with preset memory numbers and
the stations are tuned in for 7 seconds each in
the order in which they were stored. Press the
[ ] button again to cancel the preset scanning
mode.
Instant station recall (ISR)
With this function, a specific radio station can be
recalled from any mode.
ISR memory
1. Press the [SRC] button, then select the radio
mode.
2. Select the radio station which you want to
store in the memory.
3. Press and hold the [ISR] button for 2
seconds or longer.
Recalling ISR
Press the [ISR] button and the display will show
“ISR”. Then the radio station previously
memorized will be selected. Press the [ISR]
button again to disengage the unit from the
Recalling ISR function.
Radio Mode Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. Then the radio will be on.
2. To select a preset band, press the [BND]
button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
the [BND] button is pressed, the display will
change as:
F1 ➜ F2 ➜ F3 ➜ AM ➜ F1...
3. Press the [å] or [∂] button to tune in the
desired station.
Manual tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the [BND] button for 1
second or longer, then the “MANU” is lit in
the display, which means that a manual
selection function is on.
3. Press the [å] or [∂] button to manually
tune in a station.
Seek tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. If the “MANU” is lit in the display, press and
hold the [BND] button for 1 second or longer.
When the “MANU” display is off, the seek
tuning is now available.
3. Press the [å] or [∂] button to
automatically seek in a station.
Preset memory function
Preset memory function can store up to 24
stations: six stations for each of FM1, FM2, FM3
and AM.
Manual memory function
1. Press the [BND] button, to select a band you
want to store in the memory.
2. Press the [å] or [∂] button to tune into a
desired station.
3. Press and hold one of the [DIRECT] button
for 2 seconds or longer to store the current
station into preset memory.