Filter
Top Products
280-8171-00
DXZ755MC 13
English
Note:
• When “ADF 1”, “ADF 2”, “ADF 3” or “ADF USER”
is selected for ADF (Anti Distortion Filter), setting
of MAGNA BASS EX cannot be performed.
Setting the Anti Distortion Filter
The adopted “Liveliness Enhancement Filter” and
“Sound Tone Compensation” functions allow well-
modulated realistic playback without affecting the
characteristics of the original sound tone.
This unit is provided with 4 types of sound tone ef-
fects stored in memory. Select the one you prefer.
∗ The factory default setting is “ADF OFF”.
Each time you press the [ADF] button, the tone
effect changes in the following order:
“ADF 1” ➜ “ADF 2” ➜ “ADF 3” ➜ “ADF
USER” ➜ “ADF OFF” ➜ “ADF 1” ...
• ADF 1 : suitable for the genuine speakers
• ADF 2 : suitable for separate speakers
• ADF 3 : suitable for coaxial speakers
• ADF USER: this setting can be adjusted by
the user to his or her individual
preference.
• ADF OFF : no sound effect
Notes:
• The volume changes each time the ADF (Anti Dis-
tortion Filter) setting is switched. Turn down the
volume and the sub-woofer volume before per-
forming a switching operation.
• Sufficient effects cannot be obtained with some
speaker systems. In such cases, adjust the volume.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
●When “ADF 1, 2, 3” is set
“SUB-WOOF VOL” ➜ “BALANCE” ➜
“FADER” ➜ Last function mode...
●When “ADF USER” is set
“SUB-WOOF VOL” ➜ “ADF GAIN” ➜
“BALANCE” ➜ “FADER” ➜
Last function mode...
●When “ADF OFF” is set
“SUB-WOOF VOL” ➜ “BASS GAIN” ➜
“TREBLE GAIN” ➜ "BALANCE” ➜
“FADER” ➜ Last function mode...
Notes:
• As subwoofer is effective, “SUB-WOOF VOL” can
be selected.
• The display automatically returns to the previous
mode.
Basic Operations
Adjusting the subwoofer
∗ The factory default setting is “0”
∗ This function can be adjusted only when the
subwoofer output is set to “ON”. For details on how
to set the subwoofer, refer to the subsection “Set-
ting the subwoofer” in the section “Common Op-
erations”.
1. Press the [A-M] button to select “SUB-
WOOF VOL”.
2. Turn the [ROTARY] knob to select from –6 to
+6.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the ADF effects (Gain, Filter)
This adjustment can only be performed when the
ADF (Anti Distortion Filter) is set to “ADF USER”.
1. Press the [A-M] button and select “ADF GAIN”.
2. Turn the [ROTARY] knob to adjust the gain.
∗ The factory default setting is "1". (Adjustment
range: 1 to 4)
∗ “ADF GAIN” adjusts the filter effect.
3. Move the [a]/[d] lever to select “ADF FIL-
TER”.
Turn the [ROTARY] knob to select the filter.
∗ The factory default setting is “MID”. (Adjust-
ment LOW/MID/HIGH)
• LOW : attenuates high frequencies.
• MID : attenuates low and high frequen-
cies evenly.
• HIGH: attenuates low frequencies.
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can only be performed when the
ADF (Anti Distortion Filter) is set to “ADF OFF”.
1. Press the [A-M] button and select “BASS
GAIN”.
2. Turn the [ROTARY] knob to adjust the bass.
∗ The factory default setting is “0”. (Adjustment
range: –6 to +8)
3. Move the [a]/[d] lever to select “BASS
FREQ”.
Turn the [ROTARY] knob to select the frequency.
∗ The factory default setting is “50”. (Adjustment
50/80/120 Hz)