Filter
Top Products
DSC920S 7
English
Switching the screen saver
1. Press the [SS] button to switch the screen
saver. Each time the button is pressed, the
screen saver is switched in the order of OFF
➜ SS1 ➜ SS2 ➜ OFF.
∗ If the screen saver is turned on and the button
operation is performed, the screen saver
mode is released.
After information corresponding to the button
operation is displayed for 30 seconds, the
screen saver displayed is returned.
When “OFF” is selected, the display is not lit.
(only with backlight)
∗ If some other mode than SIRIUS mode is se-
lected with the system wire bound using
CeNET, the set screen saver works.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “4”. (Adjustment level :
1 to 7)
1. Press and hold the [SS] button for 1 second
or longer to enter the Adjust mode.
2. Press the [w] or [z] to adjust the contrast.
3. Press the [SS] button to return to the previ-
ous mode.
Operations