Filter
Top Products
Operations Common to Each Mode
English
24 DXZ385USB
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
3-1. Press the [w] or [z] button to select the
setting. Each time you press the [w] or
[z] button, the setting changes in the
following order:
“OFF” ↔ “ON” ↔ “MUTE”
•OFF:
This unit continues normal operation even
when the cellular phone is used.
•ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
•MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “S-CHECK”.
3-1. Press and hold the [ ] button for 1
second or longer.
“S-CHECK” appears in the display, then
the unit returns to the previous operation
mode.
Entering titles
Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
3. Press and hold the [DISP] button for 1
second or longer.
4. Press the [x] or [v] button to select
“TITLE IN”.
5. Press the [ ] button.
The display switches to the title input display.
6. Press the [x] or [v] button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters…
8. Press the [w] or [z] button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 8
characters for the title.
10.Press and hold the [ ] button for 2 seconds
or longer to store the title into memory.
Mode Number of titles
CD mode 50 titles
TV mode 20 titles
Radio mode 30 titles
CD changer mode Number of titles
DCZ625 connected 100 titles