Filter
Top Products
16
English
DXZ465MP
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press the
[
BND
]
button and select the desired
band
(
FM or AM
)
.
2. Press and hold the
[
PS/AS
]
button for 2
seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the
[
PS/AS
]
button.
2. When a desired station is tuned in, press the
[
PS/AS
]
button again to continue receiving that
station.
Note:
• Be careful not to press and hold the
[
PS/AS
]
button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing sta
-
tions.
Instant station recall
(
ISR
)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even operates
with the unit in other modes.
• ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold the [ISR] button for 2 seconds
or longer.
Radio Mode Operations
• Quick tuning:
Press the
[
,
]
lever upward or downward
and hold in position for 1 second or longer to begin
station tuning.
Preset memory function
Preset memory function can store up to 24
stations:
six stations for each of FM1, FM2, FM3 and AM.
Manual memory function
1. Press the
[
BND
]
button, to select a band you
want to store in the memory.
2. Press the
[
,
]
lever to tune into a desired
station.
3. Press and hold one of the
[
DIRECT
]
button for
2 seconds or longer to store the current station
into preset memory.
• Step tuning:
Press the
[
,
]
lever upward or downward
to perform manual tuning.
Recalling a preset station
A total of 24 preset positions
(
6-FM1, 6-FM2,
6-FM3, 6-AM
)
exists to store individual radio
stations in memory. Pressing the corresponding
[
DIRECT
]
button recalls the stored radio frequency
automatically.
1. Press the
[
BND
]
button and select the desired
band
(
FM or AM
)
.
2. Press the corresponding
[
DIRECT
]
button to
recall the stored station.
∗ Press and hold one of the
[
DIRECT
]
buttons for
2 seconds or longer to store that station into
preset memory.
• Recalling a station with ISR
In any mode, press the
[
ISR
]
button to turn on
the radio function and tune the selected radio
station. “ISR” and its frequency appear in the
display. Press the
[
ISR
]
button again to return to
the previous mode.