Filter
Top Products
OWNER’S MANUAL
PICTURE ADJUSTMENT
To adjust the picture brightness, use the Brightness UP and DOWN buttons
located on the front panel of the OHM642. Press the UP button to increase the
picture brightness. Press the DOWN button to decrease the picture brightness.
CARE AND MAINTENANCE
Cleaning the cabinet:
Use a soft, dry cloth to gently wipe off any dirt.
Do not use benzene, thinner, car cleaner, etc., as these substances may
damage the cabinet or cause the paint to peel.
Cleaning the LCD panel:
Use a soft, dry cloth to gently wipe off any dust.
The surface is easily scratched; do not rub it with hard objects.
Head Liner
Mounting
Bracket
MOUNTING OPTIONS
The OHM642 is an overhead, fold-down 6.4" monitor with an Infrared (IR) eye. It
will accept a video signal from any video source with composite video out. The IR
eye will work directly with any Clarion video source product with an IR Eye Input.
1.Look over the vehicle for a location for the monitor. Each vehicle is different
and locations will vary. Make sure the monitor will not interfere with the driver.
2.Once a location has been determined, connect the IR, A/V RCAs and power
cables to the designated sources.
3.Feed the cables through the hole in the mounting bracket and screw the
bracket to the headliner. Use short screws so as not to damage the roof.
4.Plug the cable into the monitor's 8 Pin Din connector. Mount the monitor with
the provided hardware.