Crown Audio XLC2500 Car Amplifier User Manual


 
XLC Series Power Ampliers
XLC系列功率放大器
page 2
Operation Manual
操作手册
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
reg isters, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, par-
ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufac-
turer.
12. Use only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the mains.
16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR
SPLASHING AND ENSURE THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE
EQUIPMENT.
18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL
REMAIN READILY OPERABLE.
Important Safety Instructions
重要的安全说明
1. 请阅读这些说明。
2. 请妥善保管这些说明。
3. 请留意所有警告。
4. 请遵守所有这些说明。
5. 请勿在靠近水的地方使用本产品。
6. 清理时只能使用干布。
7. 请严格按照制造商提供的操作说明进行安装。
8. 不要将本产品直接安装在任何热源,比如散热
器、电热器、火炉或者其他产生热量的设备(包
括功放)上。
9. 不要破坏具有安全功效的极性插头或者接地式插
头。极性插头有两个插脚,一个宽,一个窄。接
地式插头有两个插脚和一个接地插脚,其中宽插
片或者接地插脚是用来保障您的安全的。如果所
提供的插头不适合您的插座,请咨询联系电工更
换适合的插座。
10. 保护电源线。避免电源线被踩踏或者被捻搓。特
别注意保护在插头、便捷插座和电源线接出设备
处的电源线。
11. 仅使用制造商指定的附件和配件。
12. 仅使用制造商指定的或者随本产品一同出售的载
车、支架、三角架、托架或者工作台。在使用推
车运输设备时,特别注意推车及设备,避免其翻
倒造成伤害。
13. 在有雷电时或者长时间不使用本产品时,请拔掉
本产品的插头。
14. 所有维修服务必须由有资格的维修人员提供。当
设备受到任何形式的损坏时,比如电源线或者插
头被损坏,液体或者异物掉入设备,遭受雨淋或
受潮,不能正常工作,以及被摔碰等情况,都需
要维修。
15. 应采用断开主电源线与市电插座连接的方法来断
开产品与电源的连接。
16. 警告:为降低失火或者电击的风险,不要让设备
遭受雨淋或者受潮。
17. 不要将产品放置在容易遭受滴漏或者喷洒的地
方。例如,不要将装有液体的物品,比如花瓶等
放到设备上。
18. 请确保电源插头可随时插拔使用。
WATCH FOR THESE SYMBOLS:
注意这些符号:
The lightning bolt triangle is used to alert the user to the risk of electric
shock.
闪电三角形符号用来提示用户注意电击的危险。
The exclamation point triangle is used to alert the user to important
operating or maintenance instructions.
感叹号三角形符号用来提示用户重要的操作或者维护说
明。
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR BOTTOM COVERS. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
为了避免电击,请不要拆卸设备。设备内部无用户可以自行维护的部
件。请向有资格的服务人员咨询。
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCON-
NECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE MAINS
PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.
要完全断开此设备与交流电主线的连接,请把电源线插头从交流电插
座中拔出。需要连接电源时,可再次将电源线插头插入交流电插座。
此设备仅按海拔2000m进行安全设计与评估,因此,仅
适用于在海拔2000m以下安全使用,在海拔2000m以上
使用时,可能有安全隐患。
此设备仅按非热带气候条件进行安全设计与评估,因
此,仅适用于在非热带气候条件下安全使用,在热带
气候条件下使用时,可能有安全隐患。 要完全断开此
设备与交流电主线的连接,请把电源线插头从交流电
插座中拔出。需要连接电源时,可再次将电源线插头
插入交流电插座。
WARNING: THE APPARATUS WITH CLASS I CONSTRUCTION SHALL BE CONNECTED TO
A MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION.
警告:I类结构的设备应当连接到带保护接地连接的电网电源输出插座上。
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
MAGNETIC FIELD
CAUTION! Do not locate sensitive high-gain equipment such as preamplifiers directly above or below the
unit. Because this amplifier has a high power density, it has a strong magnetic field which can induce hum
into unshielded devices that are located nearby. The field is strongest just above and below the unit.
If an equipment rack is used, we recommend locating the amplifier(s) in the bottom of the rack and the
preamplifi er or other sensitive equipment at the top.
磁场
警告!不要把敏感的高增益设备,如前置放大器或大型录音机直接放在其上或者旗
下,因为此功放具有大功率密度,形成强磁场,这种磁场会使靠近的未屏蔽的设备
产生嘈杂声。扩音器的上部和下部磁场最强。
如果使用设备架,我们建议把功放放在架的底部,把前置放大器或者其他敏感设备
放在架顶。