Filter
Top Products
22
Before you can listen to any of XM’s170 channels, you must rst activate your Xpress
RC
.
1 Make sure your Xpress
RC
is properly installed and receiving the XM
signal so that you can hear the audio on channel 1.
2 Make a note of your XM Radio ID. You can nd it:
• On XM channel 0
• On the rear package label
• On the label on the back of your Xpress
RC
NOTE: The XM Radio ID does not use the letters I, O, S, or F.
3 Activate your service:
• Browse to http://activate.xmradio.com and follow the instructions.
OR
• Call 1 800 XM RADIO (1-800-967-2346).
4 When your service is activated, your Xpress
RC
will receive all channels.
This usually takes 10 to 15 minutes, but may take up to an hour. Your radio
must remain on until activated.
Activation