Denon DCM-380 Car Stereo System User Manual


 
ENGLISH
14
(4) To clear the entire program
Pressing the PROG/DIRECT button once more erases the entire
program. Pressing the 5 OPEN/CLOSE button also erases the
contents of a program.
Pressing the PROG/DIRECT button while a program is being played
cancels the program. Play will then be continuous to the end of the
disc currently being played, after which the player will stop
automatically.
Cautions:
Programmed playback is not possible with MP3 discs.
If an MP3 disc is specified, that step in the program is ignored.
If a program is run during playing of a track or from the Pause state,
the track which is currently being played becomes the 1st track in
the program.
Direct selection cannot be done while a program is being played.
Inputting the track number of a desired track with the Track Number
buttons adds the input track to the end of the program.
When programming, do not program a track number which is not
recorded on the disc. If such a number is programmed by mistake,
the player ignore the program.
t To Play the Desired Discs and
the Desired Tracks in the
Desired Order …………………………………………………………
You can play certain tracks on the loaded discs in any order.
Tracks on a disc not loaded can also be programmed, but if you try
to play that disc, the microprocessor detects that it is not loaded
and the following disc is played automatically.
Up to 32 tracks can be set in a program.
Program Selection
(1) Programming (Remote control only)
1
2
4
3
Press the PROG/DIRECT button. The “PROGRAM” indicator lights.
Use the DISC SELECT button, number and +10 buttons to select
the disc to be programmed.
For example, to program the 3rd track on the 2nd disc and the 12
track on the 5th disc, press , , , ,
, , and .
2+105DISC SELECT
32DISC SELECTPROG/DIRECT
(2) To Check the Programmed Tracks (Remote control only)
Press the CALL button on the wireless remote control unit.
The contents of the program are displayed in order one item at a
time each time the CALL button is pressed.
(3) To Play a Program