Filter
Top Products
8
© 2003 Directed Electronics, Inc
WIRING CONNECTIONS
Input
1. Connect the positive from one
channel of the amplifier to positive
input of s800 crossover. Connect
the negative from the same
channel of the amplifier to the
negative input of the s800
crossover.
Output
1. Connect the positive terminal of the
s800 midbass to the midbass posi-
tive terminal of the s800 crossover.
Connect the negative terminal of
the midbass to the midbass of the
negative terminal of the crossover.
2. Connect the positive input on the
two-way system crossover to the
high-pass output positive on the
s800 crossover. Connect the nega-
tive input on the two-way crossover
to the light pass output negative on
the s800 crossover.
3. Connect the tweeter and mid-range
speaker to the two-way crossover
as per instructions provided with
the two-way system.
4. To use the s800 mid-bass compo-
nent system with coaxial speakers,
follow step 1 for input and output.
Then connect the positive and nega-
tive wires from the coaxial speakers
to the high-pass output terminals of
the s800 crossover.
NNOOTTEE::
The s800 system can be added to any two-way
or coaxial system to make a true three-way
system.
FIGURE 1—S800 CROSSOVER