Dish Network SR200 Car Satellite Radio System User Manual


 
14
Setting Channel Presets
You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 3 banks, A, B,
and C, each containing 10 channel presets.
1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner
of the Normal Operation screen.
2. Select the channel you want to preset (see Basic Operation and Selecting Music).
3. Hold the number button you want to store the channel in for at least 2 seconds.
The selected preset number will flash and then remain lit on the display to show that it has been memorized.
If the preset button already has a channel stored in it, it will be replaced with the new channel.
Tuning Channel Presets
1. The 10 presets in the active bank can be selected by
pressing the 0 – 9 buttons.
2. When the desired preset bank is displayed, use the 0 –
9 buttons to tune the desired preset channel.
Searching for a Channel Preset
To search by list for a preset, press and hold the BAND button to enter Preset Tune Mode (P.TUNE). While
the contents of the preset listing is displayed, rotate the NAVIGATION WHEEL to navigate through the list.
Normal Operation Screen
3-Digit
Channel
Number
Auto Sizing/
Scrolling
Song Title
8-Character
Category
Name
Channel Name
Auto Sizing/
Scrolling
Artist Name
Band/Preset
Bank Number