Filter
Top Products
12
|
English
Audio Setup
Setting the Sound system, such as Volume offset
and Dual Zone.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Setup the Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Volume offset "Vol-Offset" –8 — ±0
Dual Zone System "2 ZONE" OFF/ON
• Volume offset: Sets each source’s volume as a
difference from the basic volume.
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by <Dual Zone
System Setting> (page 40).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [VOL] knob.
- Adjust the volume of Rear channel by <Audio
Control> (page 11).
- The Audio Control has no effect on sub source.
• You can use the Dual Zone System with the Auxiliary
input sources listed below.
- Internal auxiliary input
• You can use the Dual Zone System only when you
have set the rear speaker to any mode other than
"None" in the <Sound Management system> (page
14).
• When the "2 ZONE" is ON, ignore the following setups.
- <Sound Field Control> (page 12)
- <Sound Management system> (page 14)
- <Equalizer Control> (page 15)
- <WOW Control> (page 16)
- <Bypass Control> (page 16)
• ODD D/A System is not effective when the "2 ZONE" is
ON.
5 Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Sound Field Control
1
Select the source to adjust
Press the [SRC] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.F.C" is
displayed above the [1] button.
Refer to <Notes on Multi-function Key System>
(page 9).
3 Enter Sound Field Control mode
Press the [1] ("S.F.C") button.
• When "2 ZONE" of <Audio Setup> (page 12) is ON,
you cannot select "S.F.C".
4 Select the Sound Field Control item to
adjust
Press a [1] — [3] and [5] button.
Each time you press the [1] — [3] and [5] button,
the adjustable audio item alternates between
the ranges of all stage section’s tables on the
following pages.
Multi-function key operation Sound Field control item
[1] "XOver" "HPF-F Fc"*
"HPF-R Fc"*
"LPF-SW Fc"*
Front High Pass Filter
Rear High Pass Filter
Subwoofer Low Pass Filter
[2] "DTA" "DTA-F SP"
"DTA-R SP"
"DTA-SW"
DTA Front
DTA Rear
DTA Subwoofer
[3] "POSI" "Position" Position Setting
[5] "Preset" [1] "RCL"
[2] "MEM"
Recall mode
Memory mode
• * The following adjustment items can be selected by
[FM] or [AM] knob for "XOver".
[1] "XOver"
"HPF-F Fc" Front High Pass Filter Center
"HPF-R Fc"
"LPF-SW Fc"
Front High Pass Filter Slope
Rear High Pass Filter Center
Rear High Pass Filter Slope
Subwoofer Low Pass Filter Center
Subwoofer Low Pass Filter Slope
[FM] or [AM] Knob
Subwoofer Low Pass Filter Phase
"HPF-F Slope"
"HPF-R Slope"
"LPF-SW Slope"
"SW Phase"
General features