Filter
Top Products
English
|
17
Memory mode
Storing the values of Field Control in memory.
1 Adjust the item you wish to put in memory
By referring to <Sound Field Control> (page 12),
<Sound Management system> (page 14), and
<Equalizer Control> (page 15), adjust the item
you wish to put in the memory.
2 Select the Preset Memory item
Press the [5] ("Preset") button.
3 Enter Memory mode
Press the [2] ("MEM") button.
4 Put in the memory
Press the [1] ("MEM.1")/ [2] ("MEM.2") button
for at least 2 seconds.
5 Exit Memory mode
Press the [6] ("RTN") button.
• "MEM.1": When you press the Reset, all the sources will
be the setting value which is registered.
• The following items cannot be registered.
System Q Setting, Position Setting
Memory Recall mode
Recall the value in the memory by the memory
mode.
1 Select the source to adjust
Press the [SRC] button.
2 Select the key function
Press the [1]("S.F.C")/[2]("S.M.S")/[3]("EQ")
button.
Refer to <Notes on Multi-function Key System>
(page 9).
3 Select the Preset Memory item
Press the [5] ("Preset") button.
4 Enter recall mode
Press the [1] ("RCL") button.
5 Select the recall item
Press the [1] ("RCL 1")/ [2] ("RCL 2") button for
at least 2 seconds.
"RCL 1": Recall the value put in "MEM.1" by
<Memory mode> (page 17).
"RCL 2": Recall the value put in "MEM.2" by
<Memory mode> (page 17).
6 Exit Memory Recall mode
Press the [6] ("RTN") button.