Dual MXD254B Car Stereo System User Manual


  Open as PDF
of 12
 
7
Tuner Operation
Press TUNE
nn
or TUNE
ll
momentarilytoseekthe
next strong station.
Press TUNE
nn
or TUNE
ll
for more than 2 seconds,
then release. “MANU” will momentarily appear in the display.
Press TUNE
nn
or TUNE
ll
momentarily to move radio
frequencyupordownonestepatatime.Pressandholdto
advancequickly.Iftuningisnotadjustedfor5seconds,the
unitwillreturntoseektuningmode(default).“AUTO”will
momentarily appear in the display.
Press ST/MO for more than 2 seconds during FM tuner
operation to select mono or stereo (default) reception of the
broadcast signal.
Press BAND to select between FM1, FM2, FM3 and AM1, AM2
bands.
Press and hold BAND then press TUNE
nn
to select
Europeanfrequencyspacing.PressandholdBAND then
press TUNE
ll
toselectUSAfrequencyspacing(default).
Anytimefrequencyspacingischanged,allstationpresets
are erased.
Up to 18 FM stations and 12 AM stations can be stored.
To store a station, select the desired band and station.
Press and hold the desired preset button for more than 2
seconds. When stored, the preset number will appear in the
display. The station can be recalled anytime by pressing the
corresponding preset button.
Press AS/PS for more than 2 seconds to automatically store
the six strongest stations in the current band.
Press AS/PS momentarily to scan presets 1-6 on the current
band, pausing for 5 seconds at each. Press AS/PS again to
cancel.
Seek Tuning
Manual Tuning
FM Stereo/Mono
Band
Frequency Spacing
Storing and Recalling
Station Presets
Automatically Store
Stations
Preset Scan
MXD254B OPERATION
 previous next