Filter
Top Products
10
XDVD700 OPERATION
Control Functions - Monitor Closed
Press BAND to increment from FM1, FM2, FM3, AM ] FM1. The FM band
indicator is shown as "1", "2" or "3" and is located on the far left side of the
secondary LCD. The AM band indicator is shown as "A".
Press AS/PS momentarily to start station PRESET SCAN function,
Press AS/PS for 2 seconds to start AUTO STORE station preset function in
current BAND.
Additional LCD for system information while monitor is closed.
Press the DISP button to display various information on the secondary LCD.
Press OPEN to open or close the monitor. The unit will emit a confirmation
beep upon opening or closing. Be careful not to not touch or obstruct the
monitor movement during the open/close sequence, or permanent damage
could occur.
Press once to eject disc.
Rotate clockwise/counter-clockwise to select desired item and press once to
ENTER.
Press once to incrementally select desired source.
Selects the next chapter/track/radio station.
Selects the previous chapter/track/radio station.
Stop playback of DVD/CD/MP3.
Press once for PAUSE, press again for PLAY.
Fast forwards the chapter/track or selects the next radio frequency.
Fast reverses the chapter/track or selects the previous frequency.
Press once to MUTE audio, MUTE will appear in the secondary LCD. Press
again to return audio.
Press POWER momentarily to turn the unit on.
Press and hold POWER for more than 2 seconds to turn the unit off.
Note: EJECT will still function even if POWER is off.
Rotate clockwise/counter clockwise for desired VOLUME level.
BAND
AS/PS
(Auto Store /Preset Scan)
SECONDARY LCD
DISP
OPEN
EJECT
RIGHT ROTARY
MODE
TRACK/SEEK UP
TRACK/SEEK DOWN
STOP
PLAY/PAUSE
FAST FORWARD/TUNE UP
FAST REVERSE/TUNE DOWN
MUTE
POWER ON/OFF
VOLUME