Filter
Top Products
XDVD700 OPERATION
31
AM/FM Tuner Mode
Band
Manual Tuning
Seek Tuning
Preset Scan
Scan Tuning
Local Tuning
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press MODE until TUNER is displayed on the screen.
Touch on the screen repeatedly until the desired band is displayed, FM-1,
FM-2, FM-3, or AM.
Press the BAND button to switch between bands, FM-1, FM-2, FM-3, AM.
From the remote control:
Press the BAND button.
Touch on the screen to tune to the next higher frequency step.
Touch on the screen to tune to the next lower frequency step.
Touch and hold either or on the screen to continue tuning across
multiple stations.
From the remote control:
Touch or to perform manual tuning.
Touch on screen to tune to the next higher strong station.
Touch on screen to tune to the next lower strong station.
Press on front panel to tune to the next higher strong station.
Press on front panel to tune to the next lower strong station.
From the remote control:
Press or to tune to the next higher strong station.
Press or to tune to the next lower strong station.
Touching the PS button will scan through all presets in the current band and
play them for 10 seconds each.
Press the AS/PS button momentarily.
Touch SCAN on the screen and it will tune you to all stations available with good
reception for 10 seconds at a time. Touch SCAN again to disable.
Local tuning lets you tune in radio stations with sufficiently strong signals for
good reception. In areas that reception is poor, you can switch from local to
distance tuning by touching the DX/LOC button on the screen.
AM/FM Tuner Operation