Dual XDVD8182 Car Video System User Manual


 
XDVD8182 OPERATION
15
Power On/Off
Monitor Open/Close
Monitor Angle Position
Press POWER momentarily to turn the unit on, the unit will beep 2 times.
Press and hold POWER for more than 2 seconds, unit will beep 1 time, then
turn off. Note: EJECT will still function even if POWER is off.
Press OPEN to open or close the monitor. The unit will emit 1 confirmation
beep when opening, 3 beeps when closing. Be careful not to not touch the
monitor during the open/close sequence.
Notes:
•Theunitwillstopautomaticallyduringopen/closeifanobstacleisdetected.
If this occurs, remove the obstacle and press OPEN again to resume the
monitor open/close sequence.
•Audiocanbeheardwhilethemonitorisclosed.
Press ANGLE to increase the monitor view angle.
Press ANGLE to decrease the monitor view angle.
Notes:
•Donotattempttomovethemonitorup/downbyhand-severedamagewill
occur. Use the front panel buttons or the remote control only.
•ThecoloroftheLCDmonitorvariesbetweenviewingangles.Selectthe
angle with the most optimum view for your location.
•Thelastpositionofthemonitorcanbesavedinmemory.Themonitorwill
return to its last position automatically the next time it is opened.
Notes:
•Thevehiclemustbeinparkandtheparkingbrakeappliedtoviewvideoon
the in-dash monitor.
•Asasafetyfeature,ablue“CAUTION” screen will show on the display when
the vehicle's parking brake is not engaged. DVD, AV1 audio can be heard
while the vehicle is in motion.
•Thevideodisplayofthein-dashunitwillnotoperatewhilethevehicleis
moving. This is a safety feature to prevent driver distraction. In-dash video
functions will only operate when vehicle is in Park and the parking brake
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
See DVD operation on page 32 for more details on how to initialize the
PARKING BRAKE.
General Operation