Dual XDVD8183N Car Video System User Manual


  Open as PDF
of 72
 
5
Mounting sleeve opening dimensions
7-3/16” x 2-1/16” (183 mm x 53 mm)
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
Please read entire manual before installation.
Before You Start
•Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.
•Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfromdirectsunlight,orwhereit
would be subject to dust, dirt or excessive vibration.
Getting Started
•Slidetheunitoutofthemountingsleeve.
•Installmountingsleeveintoopening,bendingtabstosecure.
•Connectwiringharnessandantennaasshownonpages6-7.Consultaqualifiedtechnicianifyouareunsure.
•Certainvehiclesmayrequireaninstallationkitand/orwiringharnessadapter(soldseparately).
•Testforcorrectoperationandslideunitintomountingsleeve.
•Attachunittomountingsleeveusingsupplied#1Phillipsscrews.
•Snaptrimringintoplace.
•Mounttheiplug™adaptertoanysmoothcleansurfaceusingthesupplieddouble-sidedtapeorPhillipshead
screws.
XDVD8183N INSTALLATION
Preparation
 previous next