Filter
Top Products
Technical Information/Warranty
Dynaudio Acoustics BM9S 13
Technical Specifications
Parameter Data
System Active subwoofer
Bass principle Closed
Frequency response 29 Hz to 250 Hz (+/-3 dB)
Inputs
• LFE/Slave
• SAT/SUB
XLR
right/left full bandwidth, XLR
Input impedance
• + branch
• – branch
20 kOhm
10 kOhm
Sensitivity 75 mV
RMS
to 5 V
RMS
, adjustable
Max. input voltage 10 V
RMS
Outputs
• Slave
• SAT/SUB
XLR
right/left, Highpass filtered, XLR
Output impedance 100 Ohm (each branch)
XLR Pinout 1: 0 / 2: + / 3: –
Mode selector LFE, Slave (Phase and volume controls are bypassed
in slave mode).
Phase adjustment 0°, 180°
SAT Highpass Flat, 60 Hz, 80 Hz,
SUB Lowpass 50 Hz to 150 Hz
Auto ON/OFF
• Automatic ON (LED green)
• Automatic mute (LED red)
when signal is detected at input
when no signal is detected for 15 to 20 min.
Amplifier power 200 W, 4 Ohm
Power consumption
• Standby
• max.
16 W
325 W
Woofer
• Cone
• Coil
240 mm/10″, one piece molded MSP (Magnesium
Silicate Polymer) cone
100 mm/4″, pure aluminium voice coil
Dimensions, external
(height x width x depth)
Cabinet volume
Weight
29,4 cm x 28,9 cm x 31,8 cm (incl. feet and grille)
15,9 liters
10 kg
Mains 100-120 V, 50/60 Hz, Fuse T3.15 A
220-240 V, 50/60 Hz, Fuse T1.6 A