Filter
Top Products
55
How to operate the receiver with an optional DSP/EQ unit connected
2.
Tap button [AUDIO CONTROL] to select the desired
mode of adjustment.
The mode sequence on the button is as follows:
3. Turn the [AUDIO CONTROL] button.
This button adjusts the reverberation level and duration.
Right: Increases the value.
Left: Decreases the value.
4. Hold down a button, [1] to [6], for more than two
seconds to preset a value.
The preset value is overwritten by the value set using
the above steps.
ReverberationInitial echo delay
Long
Time
Initial echo]
Reverberation duration
Direct (original sound)
Level
High
Level
•
Duration value
LR dB
LR S
ER dB
ER mS
(Reverberation level)*
(Reverberation duration)*
(Initial echo level)
(Initial echo delay)
The level and duration adjustments are available
in CONCERT and CATHEDRAL modes only.
*
Buttons [1] to [6][AUDIO CONTROL] button