Filter
Top Products
29
Basic operation
A variety of settings can be changed.
The function mode is activated.
Setting items will be displayed in the following order when the
[SEL] button is turned to the right.
Making changes with Function Mode
Press the [DISP FUNC] button for more than one
second.
1
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:
Turn the [SEL] button to select BEEP.
1
The Guide Tone Mode will be switched ON/OFF.
Press the [SEL] button.
2
At this time, other adjustments can also be made in
Function Mode.
Press the [RTN] button.
5
Press the [DISP FUNC] or [RTN] button to exit
Function Mode.
6
Turn the [SEL] button to select ON or OFF.
3
Press the [SEL] button to select current setting.
4
Turn the [SEL] button in either direction to display setting
items for selection.
2
[DISP FUNC] button
[RTN]
button
Disabling the guide tone feature (for button operation)
BEEP CLOCK LINE OUT
[SEL] button