Filter
Top Products
37
How to operate the tuner
If the vehicle’s battery is disconnected (for repairs to the vehicle
or for removing the receiver), all stations in memory will be lost.
In such a case, set stations in memory again.
Caution
Press the [SEL] button for more than two seconds until a
beep is heard.
2
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are
automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.
ATTENTION
•Pressing the preset buttons ([1] to [6]) allows you to make one-
touch station selections. The frequency of the selected station
is indicated on the display.
•When a new station is set in memory, the station previously set
in memory will be deleted.
•If there are fewer than six receivable stations, the stations set in
the remaining buttons will be retained.
Press the [FM AM] button to switch to the desired FM or
AM bands.
1
Entering stations into memory automatically
(The automatic preset mode: ASM)
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
[FM AM] button
[SEL]
button
Buttons [1] to [6]