Filter
Top Products
-
7
-
Español Français Italiano
Nederlands
SvenskaEnglish
Vehicle component adapter wires
Vehicle harness
From main unit
-
Example of using vehicle adapter wires
-
-
Vehicle connections
-
••
You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the
power supplies can be utilized. (Contact the dealer for further details.)
••
Be sure to wrap the connection wires with electrical tape or another insulation method to insulate them.
Tip
Power supplies
for combined
equipment
Main unit connections
Line-out terminals (Front / Hi)
Connect to the RCA connector of an external amplifier.
Line-out terminals
(
Rear
/ Mid)
Connect to the RCA connector of an external amplifier.
Line-out terminals (Non fader / Low)
Connect to the RCA input connectors of a EQ, or the RCA input connectors of a woofer amplifier.
The speakers to connect will vary depending on whether the speaker layout is 1-way speaker or
3-way speaker. (Refer to the instruction manual for details on switching the speaker layout.)
••
If the speaker layout is “1-way speaker”:
Connect to the front speaker.
Connect to the rear speaker.
The terminal are not used.
••
If the speaker layout is “3-way speaker”:
Connect to the high-range speaker(tweeter),
Connect to the mid-range speaker(squawker),
Connect to the low-range speaker(woofer).
AUX in terminals
Connect if using together with portable audio equipment that is sold separately.
* If the output from the connected equipment is via a mini plug, it will need to be converted to RCA.
E-LAN terminal (13P)
Connect to the E-LAN terminal of the CD changer, etc.
LAN terminal
(8P)
Connect to the LAN terminal of GPS unit.
A
B
C
D
F
E
A
B
C
A
B
C