Eclipse - Fujitsu Ten CD8443 Car Satellite Radio System User Manual


 
24
Basic operation
Various audio control modes may be fine-tuned using this
procedure.
Modes will switch in the order shown below each time the
button is pressed.
Switching audio control modes
Press the [AUDIO CONTROL] button for less than one
second to select the item to be adjusted.
1
[AUDIO CONTROL] button
*
1:
When the sound adjustment mode is in normal mode, this
adjustment is not available. (Refer to page 73.)
*
2:
When the sound adjustment mode is set to pro mode, or if
the position selector is "ON" in normal mode, this
adjustment is not available. (Refer to pages 80 and 86.)
*
3:
When the sound adjustment mode is pro mode, this
adjustment is not available. (Refer to page 86.)
VOL TREBBASS
*
1
*
1
BAL
*
2
FAD
*
2
NON-F
*
3
Adjusts volume. Volume level can be adjusted for each source
(CDP/CDC, FM and AM).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left: Decreases the volume.
VOL (VOLUME) Mode
Adjusts bass level. In pro mode, bass can be adjusted for each
source (CDP/CDC, FM and AM).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left: Softens low sounds.
BASS Mode