Eclipse - Fujitsu Ten CD8445 Car Stereo System User Manual


 
121
How to operate the Sound Adjustment Mode
IX
Non-fader phase
The sounds that are output from woofers include sounds that are in
the same frequency ranges that are output from the front and rear
speakers, and under the various conditions that can occur inside
vehicle compartments, some of these sounds may cancel each
other out. This phenomenon can be eliminated by changing the
phase of the woofer.
The phase of the woofer can be set to normal timing (in which the
output timing between the front and rear speakers and the woofer is
the same) or reverse timing (in which the output timing between the
front and rear speakers and the woofer is different), depending on
the vehicle compartment conditions.
Non-Fader output
Depending on your external amplifier, non-fader output may be
stereo or mono.
E-iSERV sound effect customizations
The parametric equalizer, time alignment, and crossover setting can
be adjusted using this deck, or through the Eclipse web site.
(Settings can be stored on CD-R or Memory Stick.)
CD8445_09_E.fm 121 ページ 2004年12月16日 木曜日 午後4時58分