Filter
Top Products
33
ESN security operating procedure
III
Canceling the security function using a Memory Stick
Check that the unit is in standby.
Press and hold button [1], then the [FUNC] button,
and hold both for more than one second.
A [SEC] message appears, then in two seconds it will change
to [- - - -] (Security code input display).
Press the [DISC] button.
A [MS] message will appear.
Insert the Memory Stick and close the front panel.
The recorded data will be read from the Memory Stick.
If the contents recorded in the Memory Stick match
the information recorded by the deck, [CANCEL] will
appear on the display.
The security function will be canceled and the deck will return
to normal operation.
Eject the Memory Stick.
Refer to "Ejecting the Memory Stick" on page 94.
If a Memory Stick has already been inserted, a [MS EJECT] message
appears. In this case, eject the Memory Stick and insert again. (Refer
to "Ejecting the Memory Stick" on page 94 for details on ejection of the
Memory Stick.)
● If a reading error occurs or if an incorrect Memory Stick is inserted,
[ERR] will appear on the display for two seconds, and then the
display will change to [EJECT]. If this happens, eject the Memory
Stick and try again.
● Security setting cannot be canceled by this procedure if the
Memory Stick containing the security code is formatted.
[DISC] button [FUNC] button
Button [6]
CD8445_03_E.fm 33 ページ ２００５年４月２５日 月曜日 午前９時５１分