Filter
Top Products
18
Tape Operation
Skip blank
If skip blank is active, automatic forward is activated at blank tape sections
which are longer than 10 to 15 seconds.
In order to activate the function, press the multifunction button “SB” until SB
is shown on the display.
Scan - search
Press the right rotary control to start the scan search.
SC appears on the display. Each track is played for approx. 10 seconds.
In order to cancel the function, press the track switching buttons or the fast
forward / rewind buttons.
Cleaning the cassette mechanism
After a time, the reproduction quality of cassettes is reduced due to
unavoidable dirt and dust deposits on the sound head. The drive components in
the cassette mechanism also become soiled. For this reason the cassette
mechanism should be cleaned from time to time. The prompt CLEAN appears
on the display after each 30 hours' running time.
Use a cleaning cassette suitable for reverse operation for this purpose. The
cleaning cassette should be removed again after 30 seconds.
!
!
!
USEnglisch.bk : CC.fm Seite 18 Freitag, Februar 1, 2002 10:33 AM