Filter
Top Products
7
General Operation
Switch on / off
Press button.
Further on / off switching possibilities: Via ignition. In order to switch on via
the ignition, the unit must previously have been switched off via the ignition.
After switching off the ignition, the unit can be prevented from switching off
by pressing the button within 3 seconds.
Note : The unit can also be switched on with the ignition switched off via
the button, but will switch off automatically after 1 hour.
Adjust volume
Turn volume control to right / left. The volume is increased or decreased. The
current volume level is shown on the display.
Mute function
The unit can be switched to mute in each operating mode by pressing the
volume control. MUTE appears on the display.
The mute function is cancelled by pressing the volume control, changing the
operating mode, changing the waveband or inserting a tape/CD.
Activate tone menu
Press button. The tone menu is activated. The following functions can be
called up: BASS (Bass), TREB (Treble), BAL (Balance), FAD (Fader),
LOUD (Loudness) and STEREO (Reception optimization).
Bass and treble settings for the AM/FM wavebands, for road traffic
announcements and tape/CD operation are stored separately (values from -7 to
+7). The settings for fader, balance and loudness (no loudness with AM) are
stored together for all operating modes (values from -7 to +7).
USEnglisch.bk : Allgemeine.fm Seite 7 Freitag, Februar 1, 2002 10:33 AM