Filter
Top Products
E-9
English
SELECTOR SECTION – FRONT
1 Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving function) mode ON (See P. E-42.)
Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.)
2 Remote control signal receiver
Receives signals from the remote control.
3 POWER button
Turns the power “ON” and “OFF”.
* Even when the power is “OFF”, some parts are still powered.
4 Video3, S-video input terminal *
Connect this terminal to the S-video output terminal of your VCR, etc.
5 Video3, video input terminal *
Connect this terminal to the video output terminal of your VCR, etc.
6 Audio input terminals (L/R)
These are the audio input terminals for the Video3 and RGB3 terminals.
Input the audio for the video to be seen here.
7 RGB3 input terminal
Connect this terminal to your PC’s mD-sub output terminal.
* On selecting the video input format
(See “SETTING THE INPUT TERMINALS” on P. E-41.)
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
02.10.29, 5:03 PM9