Filter
Top Products
Installation
Mounting Hole Dimensions 180mmW x 178mmD x 50mmH
Insert the sleeve into the mounting hole and select the appropriate tabs to secure it rmly by bending them into position.
Use the supplied strap to support the rear of the unit.
CAUTION:
FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE MOUNTED
WITHIN 20' OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS
LIMITATION.
20' MAX
FRONT PANEL
SIDE VIEW
OF
CHASSIS
NUT(5MM)
NUT(5MM)
FASTEN THIS END TO A SECURE LOCATION.
DRIL HOLE IF NECESSARY.
MOUNTING SLEEVE
SCREW STUD
BEND BOTTOM TABS
DOWNWARD
DETACHABLE
FRONT PANEL
BEND TOP
TABS UPWARD
PERFORATED STRAP
FASTEN THIS END TO SCREW STUD ON
REAR OF CHASSIS
SCREW (5MM)
Headunit Installation
Before installing the unit, please remove the two transit screws.
Note: When installing this unit on a vessel, use the two pieces of plastic lm (supplied with the unit) to seal the two holes
after removing the screws.
Version 1.0
001
INSTALLATION
RECORD YOUR PRODUCT DETAILS HERE:
MODEL NUMBER DATE OF PURCHASE
AFFIX RECEIPT HERE
Contents
Installation 1
Button Description 4
General Operation 5
Menu Selection Function 6
Radio Operation 6
CD Operation 7
MP3/WMA Operation 8
iPod® Operation 9
USB Operation 10
Supported MP3/WMA Formats 10
Technical Specifications 12
Tuning Range 12
Notes 13