Filter
Top Products
If there is no CD loaded press OPEN Button (8) and gently insert the disc until you feel some resistance. The CD will be drawn
into the unit and playback will begin.
If there is a CD already in the unit press the MODE button (11) until CD mode is displayed.
EJECTING A DISC
Press the OPEN button (8) and press the EJECT button (14).
PAUSE PLAY
Press PAUSE/PLAY button (1) to pause play, press again to
resume.
TRACK SELECTION
Press the button (19) to skip to the previous track or
Button (21) to skip to the next track.
Press and hold (21) to FAST FORWARD and (19) to FAST
REWIND.
REPEAT TRACK
Press RPT button (3) to continuously repeat the track.
Press again to cancel.
SHUFFLE
Press the SHF button (4) to play the tracks in a random
order. Press again to cancel.
SCAN TRACKS
Press SCN button (2) to play a few seconds of each track.
Press again to cancel and continue playing the track.
Radio Operation
Press the MODE button (11) to select the Radio mode.
SELECTING FREQUENCY BAND
Press BND/LOU/ENT button (10) to cycle through and select the desired band
Menu Selection Function
Press and hold SEL button (17) to enter Menu Select Mode. Press the VOLUME UP button (18) or the VOLUME DOWN button
(20) to adjust the BEEP function.
BEEP 2nd MODE
Only beeps on press and hold functions.
BEEP ALL
Beeps on all key presses.
BEEP OFF
Beeps disabled.
FM 1 FM 2 FM 3 AM/MW
SELECTING STATION
Auto Seek
Press the button (19) or button (21) to activate
the automatic seek function up or down the frequency
spectrum.
Manual
Press and hold the button (19) or the button (21)
until MANUAL appears on the screen. If neither button is
pressed for several seconds the unit will switch to AUTO
SEEK.
AUTOMATIC MEMORY STORING AND PRESET SCAN
Automatic Memory Storing
Press and hold the AS/PS button (23) and the unit will
search for the strongest signals and then store them in
the presets.
Preset Scan
Press the AS/PS button (23) to preview all stored preset
stations. Stations with weak signal levels are bypassed.
STORING PRESET STATIONS
There are six presets available for each band (FM1, FM2,
FM3 and AM).
1. Select the desired band and tune in the station
you want to store.
2. Press and hold the PRESET button (24) 1-6
until a beep is heard to conrm and the preset
number is displayed.
MONO/STEREO
Press MON button (9) to select Mono or Stereo mode.
TUNER REGION SETUP
To change the tuner region between Europe (EUR) and USA
(default is Europe),
1. Press and hold SEL/MENU button (17) until
region displayed.
2. Then press VOL + (18) or VOL - (20) buttons
to cycle.
CD Operation
007
CD OPERATION
006
MENU SELECTION