Filter
Top Products
10
CONNECTION AND PREPARATION
_____
Power supply
The player operates with the integrated lithium-polymer battery 1 x 3.7 V,
1,000 mA.
Charging the battery
Charge the battery using the power supply unit supplied or on the computer. You
can also charge the player by connecting it to a USB compatible hi-fi system
using a USB cable.
Note:
When charging the battery with the power supply unit supplied, the player is
still ready for operation.
1 Plug the power supply unit cable into the »DC 5V« socket of the player
or
connect the USB port of the player via the USB cable with the appropriate
interface on the computer or hi-fi system.
2 Connect the power supply unit to the mains and switch on the computer or
the hi-fi system.
– The display indicates the charging progress. The charging time is approxi-
mately four hours. You can see in the »
P
« display when the battery is
fully charged.
Notes:
The display of the player tells you about the state of the battery. If you see
this symbol in the display, the battery is running low.
The playing time of the device with batteries is up to eight hours in audio
mode and up to four hours in video mode.
Note:
There is a risk of explosion if the battery is not replaced properly. Only use
the same type of battery or an equivalent.
Connecting to the computer
1 Switch on the computer.
2 Switch off the player.
3 Connect the USB interface of the player to the respective interface on the
computer via a USB cable.
– A display will appear as soon as the connection is made.