Filter
Top Products
12
Basic functions
Switching on and off
1 Switch on the television by pressing the »Ȃ« button on the tele-
vision set.
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
2 Press the »
Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
– After switching on, the station preset of the TV Guide provider
is automatically selected. After a short time, the information
about the current and upcoming broadcast is displayed.
3 Completely switch the television off by pressing »
Ȃ« on the
television set.
– This saves electricity.
Selecting channels
1 Use »1…0« to select channels directly.
Preselect two digit channel positions with »–/– –«.
2 Press »P+« or »P-« to move up and down channels.
Selecting AV channel positions
1 Use »AV« to select AV channels directly.
Adjusting the volume
1 Adjust the volume with »
Ǹ
« or »
Ƿ
«.
Muting
1 Use »
p
« to switch the sound off (mute) and to switch it on
again.
Call up TV Guide and time.
After switching the station presets, information about the current
broadcast is displayed (TV Guide).
1 Call up information about the current and next broadcast by
pressing »
Ȅ«.
- The information and the time are briefly displayed.
Note:
If the message »No info« is displayed, switch to the channel
preset of the TV Guide provider by pressing »1…0« or »P+«
or »P-«. After a few minutes the new data will have been loa-
ded.
Displaying information
1 Press »POS« to display the information.
– The display disappears automatically after a short while.
TELEVISION OPERATION
___________________
Tele Pilot 160 C
VCR
DVD
SAT
z
TXT
PIP
AV
POS
SIZEPAP
SCAN
d