Filter
Top Products
10
ADDRESSING THE TOUCHSCREEN
OmniTouch touchscreens are connected to the same communications bus as HAI consoles.
Each console and touchscreen must have a unique address. The default address setting of the
touchscreen is "1".
When power is first connected to the touchscreen, if the touchscreen isn’t addressed properly
(other consoles or touchscreens already occupy the touchscreen address) or isn’t communicating
with the controller, the following page is displayed.
To assign an address to the touchscreen, press and hold the HAI logo for three seconds. The
"Touchscreen Address" page is displayed.
This page allows the installer to adjust the brightness and contrast of the touchscreen, enable or
disable video, and assign the touchscreen address.