HANNspree (HSG1283) Car Video System User Manual


 
14
User’s Manual
FRONT PANEL CONTROL
Power Button:
Press this button to switch ON/OFF of monitor’s power.
Power Indicator:
Green Power On mode.
Flicker Power Saving mode.
MENU / RETURN:
Turn the OSD menu on/off or return to the previous menu.
Adjust ▲▼:
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
i Button: Analog Input Models
1. The OSD menu is used asconfirmationfunction during start-up.
2. The Auto adjustment function works only for VGA input. (The auto adjustment function is
used to optimize the horizontal position, vertical position,clock,and phase.)
i Button: Digital Input Models
1. Press i to enter Source selections. (Selections include VGA, HDMI, etc. The actual
selections may very depending on the models. This function is only available in models with
digital inputs)
2. The OSD menu is used asconfirmationfunction during start-up.
3. Press and hold this button more than 3 seconds will start Auto Adjust function when using
VGA input only. (The auto adjustment function is used to optimize the horizontal position,
vertical position,clock,and phase.)
Hotkeys:
1. Restore Brightness and Contrast defaults:
To reset both the Brightness and Contrast to their default values, press the and keys
at the same time.
2. ASPECT RATIO:
PressMENU+key to change to FULL MODE or FIT MODE.
3. Change Resolution:
For similar screen display resolutions (see table below), the screen resolution can be changed by
pressing theMENU+button to achieve the optimal display quality.
4. Change Preset Mode: [The availability of this function depends upon the selected model] Press
MENUkey for 3 seconds to select one of the following modesPC,MOVIE,
GAME,ECO. Default isPC.