Troubleshooting
Setting and Confirming SCSI Parameters
Chapter 378
Displaying SCSI IDs
To display the initiator SCSI IDs for an adapter using the SCSI
command, use the following syntax:
SCSI init
bus_number slot_number
where
bus_number
Specifies the number of the bus on which the adapter is
installed.
slot_number
Specifies the number of the slot the adapter is in.
For example:
• To display the SCSI ID for an adapter on bus 5 slot 2, issue the
following command:
SCSI init 5 2
The command displays the following output:
PCI device /5.2 = 7
• To list the SCSI IDs for all the bus and slot numbers, issue the
following command:
SCSI init