Filter
Top Products
Rev. A 4 HMMU000880
04/08/04
NOTES:
Rev. A 9 HMMU000880
04/08/04
SECTION 3:
OPERATION
3.1 POWER MANAGEMENT
This monitor is equipped with DPMS (Display Power
Management Signaling) function which automatically switches
to power saving mode (less than 5 watts consumed) when the
computer is left unattended. Although the monitor can be left in
power saving mode for longer periods, it is recommended that
you turn it off after your daily work.
The DPMS function requires support from the computer system
of any software DPMS function currently being used. If the
keyboard (or mouse) is left unattended for a certain period, the
program or system will set the sync signals to SPMS modes.
The DPMS function has three states. Recommended signals,
power consumption, and recovery time are shown in the table
below:
Signal
Status
HSync
VSync
Video
Power
Consumption
Recovery
Time
LED
Indicator
On Pulse Pulse Active 30Watt -- Green
Standby
No
Pulse
Pulse Blank
Alternating
Green/Orange
(1sec)
Suspend
Pulse
No
Pulse
Blank
Alternating
Green/Orange
(0.5sec)
Off
No
Pulse
No
Pulse
Blank
Less than
5Watt
Within
2sec
Orange