Filter
Top Products
16
To mask only the AF with different PI.
- MASK ALL
To mask both PI and strong signal non-RDS station.
Mute
Press the MUTE button to activate the Mute function. Press it again or use the VOL/SEL knob on the panel or press
the VOL+/VOL- buttons on the RC to cancel.
Adjusting clock
1. Press and hold CLOCK DISPLAY button for more than 3 seconds to select the hour setting. Hour digits will
blink.
2. Rotate VOL/SEL knob to set the hours.
3. Press VOL/SEL knob to select the minute setting. Minute digits will blink.
4. Rotate VOL/SEL knob to set the minutes.
5. Press CLOCK DISPLAY button, or leave the unit idle. Time setting is now confirmed.