Filter
Top Products
18
Save Your Preset Stations
There are six numbered preset buttons, which can store and recall stations for each band. If while listening to a
radio station you would like to save the station as a pre-set, press and hold one of the numeric buttons 1-6 until
you hear a beep. The button you pressed is now the pre-set button for that station.
Automatic Store/Preset Scan
Automatic Scan and Store
While listening to the FM radio, press and hold APS button for 3 seconds. The unit will automatically scan and
save stations for all the 3 FM bands, whichever band (FM1, 2 or 3) you are listening to. While listening to the AM
radio, press APS button for 3 seconds. The receiver will automatically scan and save stations for the 2 AM bands,
whichever band (MW1 or 2) you are listening to.
Scan Saved Stations
Press APS button on the panel or AMS button on the RC once to perform the scanning functions. In FM mode,
press APS button on the panel or AMS button on the RC and the stations in that FM band will be scanned; press
the buttons in AM mode and scan the band stations of that AM band.
RDS-EON CONTROL
This unit is equipped with the latest technology of EON control, so that when you are listening to Radio or CD, if
there is any travel announcement from a nearby local station, the radio will already know the frequency of that
radio station. Then it will receive the station, turn up the volume, or interrupt the playback of the music for the
duration of the announcement. At the end of the announcement the radio will return to its previous state ready for
the next announcement.
AF-ALTERNATIVE FREQUENCY
Press 7/AF numeric button on the panel so that the unit will choose the strongest FM signal for the selected station,