Filter
Top Products
16
BEEP
Turn BEEP on if you want the pressing of buttons to be sounded. Press SEL button until the display shows
BEEP, then press VOL +/- buttons to turn BEEP sound ALL or OFF or 2
nd
(you hear BEEP sound when you
press the button over 1.5 seconds).
DISP REV:
Press VOL +/- buttons to select LED display color between black and white.
Turning the sound off
Press MUTE button to turn the sound off. Press it again or press VOL +/- buttons to turn the sound on.
Mode setting
Press MODE button on the panel repeatedly to select: TUNER => DVD (if inserted) => USB (if USB device is
inserted) => SD (if the flash card is inserted) => AUX.
Equalizer setting
Press and hold TA/DSP button on the unit or press DSP button on the RC to select the equalizer mode: FLAT
=> CLASSICS => POP => ROCK => DSP OFF.
AV jack
Intended to receive audio and video signals by connecting to outside input device.
Display
Press DISP/DUAL button on the unit or DISP/DUAL button on the RC to see current tuning information and
time. Sequence of the menu: Clock/Time => Radio Frequency => PTY=> Exit.
Sub-woofer
Long press MODE button to set Sub-woofer on/off.