Filter
Top Products
7
Attaching the control panel
1. Insert the right side of the control panel into the main
unit (pic. 3).
2. Press the control panel on to the left side of middle of it
until a “click” sound is heard (pic. 4).
Caution:
Do not insert the control panel from the left side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be
careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back of the control panel.
Pic. 3
Pic. 4