Filter
Top Products
24
ENGLISH
Problem Possible
Cause
Suggested Action Reference
Screen is blank
and power
indicator is steady
green
Brightness and
Contrast may be
too low
Adjust brightness
and contrast.
User controls
section on page
15
Screen is blank
and power
indicator is
Amber
The monitor is in
the Power saving
status
Press any key on
the keyboard or move
the mouse to restore
operation.
Check the Power
Management
software on your
computer
Power
Management
section on page
21
Screen shows
“ Attention - Cable
Not Connected”
message
The monitor is not
receiving a video
signal
Check that the
signal cable is firmly
connected to the
computer.
Check that no
pins are bent in the
signal cable
connector.
Connecting your
Monitor section
on page 7
Screen shows
“Input Not
Supported”
message
Display mode of
the computer is
outside the range
of the monitor
Reconfigure the
computer to use a
supported display
mode.
General
Information
section on page
19
Image appears to
be smeared
There are
noises in the
video signal
Select Image
Setup menu in the
OSD. Then select
MANUAL to adjust
Phase/Clock settings.
User Controls
section on page
15
Image appears to
be discolored
The Color setting
may be incorrect
Adjust the Color
settings.
User Controls
section on page
15