Filter
Top Products
iBN16
Using the
4
P8
Using Bluetooth: Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your
Device Manually”.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability
(typically under ‘Settings’) as described in the device’s user manual.
2. Slide the Power OFF/Bluetooth/Aux Switch on the speaker unit to position.
5.
Use the controls on your device to play or pause audio, adjust volume, and navigate tracks.
6. When done listening, slide the Power OFF/Bluetooth/Aux Switch to the position to turn the unit
OFF. Remember to turn off your audio device, too.
NOTE: To disconnect your device, simply touch it again on the NFC antenna on top of the unit. To pair a
device manually, please see the following “Using Bluetooth: Pairing Your Device Manually” section.
3. Place your NFC–enabled device in play mode.
4. Touch the NFC area of your playing device against the NFC antenna on
top of the unit. The unit will enter automatic pairing mode, tones will
sound and the Power/Charging/Pairing Indicator will flash red and
blue while the unit attempts to pair. If prompted, accept Bluetooth
pairing. “iHome iBN16” should appear on your device’s menu.
Once
paired with a device, the Power/Charging/Pairing Indicator light on the
back of the unit will glow steadily and your music will play through the
unit.
NFC antenna