Filter
Top Products
5
Using Bluetooth: Pairing Your Device Manually
Pairing with a Different Device
iBN16
Using the
P9
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user
manual.
2. Slide
the Power OFF/Bluetooth/Aux Switch on the unit to the position. The unit will turn on and attempt
to auto link to a previously paired device for 10 seconds, indicated by a 3 note tone and the
Power/Charging/Pairing Indicator Light on the back of the unit flashing blue. If a linked device is found,
the indicator will glow solid blue.
3. If no linked device is found, the unit will enter pairing mode, indicated by a 1 note tone and the
Power/Charging/Pairing Indicator Light on the back of the unit will flash blue and red while the unit
attempts to pair. “iHome iBN16” should appear on your device’s menu. On some devices, tap on the
device name to begin pairing. If your device asks for a password, enter 1234 on the keyboard of your
device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to auto link mode.
To retry pairing, move the Power OFF/Bluetooth/Aux Switch to the position then move it back to the
position.
4.
Once paired with a device, the
Power/Charging/Pairing Indicator Light on the back of the unit
will glow
blue steadily
. There should be an indication on your device that pairing is complete. On some devices, you
must then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device
should link to the iBN16 whenever within range.
1. When you power ON the speaker, it will automatically link with the previously paired Bluetooth device
as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must
tur
n off the Bluetooth capability of the already paired device.