Filter
Top Products
ENGLISH
8 OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory
with the COMPLIANT TIMING shown on page 16. You are
also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 12 for SCREEN
ADJUSTMENTS.
(
Press the Menu Button to start the On Screen Display feature. There are additional menu pages which
can be switched by using the / Buttons.
B
Select the menu page which contains the adjustment item you want to make. Press the Menu Button.
Then, use the / Buttons to select the desired adjustment item.
The On Screen Display disappears several seconds after you stop pressing the buttons while performing an adjustment.
n
NOTE
An adjustment scale appears after you press the Menu Button. Use the / Buttons to change the vertical position settings. The vertical
position of the overall display should be changing accordingly while you are doing this.
C
Press the Menu Button again. Use the / Buttons to make the appropriate adjustment or setting.
Adjustments for Position, Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only
one setting which applies to all signal timings.
n
For example, to correct for vertical position, select menu page of “Picture Control” and then press the Menu Button. Then, select “V
Position” by using the / Buttons.
D
Press the Auto (Return) Button to go back to the previous screen.
n
Any changes are automatically saved in the memory when the On Screen Display
disappears. Turning off the power should be avoided
while using the Menu.
OPERATING THE MONITOR