Filter
Top Products
Page 11INF7001a Hardware Guide
Remote buttons
HOME
INFO
RESIZE
SWAP
VOL UP
VOL DOWN
BACK
MUTE
CONTRASTBRIGHTNESS
ON/OFF
INPUT MENU
PIP
INPUT
AUDIOPOSITION
OK
POWER
i
POWER
Power: Switches the power on or puts the monitor into Standby.
HOME
Home: Changes the active source back to the embedded PC.
INPUT
Input: Toggles the Input Source menu on and off, which allows the user to
change sources. Options include: HDMI1, HDMI2, PC, and VGA.
MENU
Menu: Turns the OSD menu on and off.
RESIZE
Resize: Switches between screen modes. Modes vary based on the source.
ON/OFF
PIP
PiP On/Off: Turns the PiP function on and off and changes the PiP
configuration between two active PiP sources. Options include corner and
side-by-side configurations (50%-resized, 25%-resized and 50%-fullscreen),
depending on source types.
INPUT
PIP
PiP Input: Switches the PiP window source. Options include HDMI1, HDMI2,
PC, VGA, Component, S-video and Video. Note: The PiP window is not visible
when a secondary source has not been selected.
PIP
SWAP
PiP Swap: Switches the position of the main and secondary sources.
PIP
POSITION
PiP Position: Moves the PiP window position from corner to corner (upper
left, upper right, lower left, lower right).
PIP
AUDIO
PiP Audio: Turns the PiP audio mix on and off.
BRIGHTNESS
Brightness: Opens the Brightness OSD menu. Use the right and left arrow
buttons to adjust.
CONTRAST
Contrast: Opens the Contrast OSD menu. Use the right and left arrow buttons
to adjust.
BACK
Back: Returns the user to the previous menu.
OK
Left, Right, Up, Down Arrows and OK: Use these buttons to navigate
through and make changes to the Onscreen Menu features.
INFO
i
Info: Displays source information.
VOL UP
Vol up: Increases the audio volume of the following sources: HDMI 1, HDMI
2, Audio In L/R, Audio In 3.5mm and Audio Out L/R. The microphone volume
level is controlled by the PC volume controls.
VOL DOWN
Vol down: Decreases the audio volume of the following sources: HDMI 1,
HDMI 2, Audio In L/R, Audio In 3.5mm and Audio Out L/R. The microphone
volume level is controlled by the PC volume controls.
MUTE
Mute: Switches the audio on or off for the following sources: HDMI 1, HDMI 2,
Audio In L/R, Audio In 3.5mm and Audio Out L/R.