Filter
Top Products
Page 20
Advanced Option
Sel Adjust Enter Back Quit
< >
<
<
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
OVER SCAN
SCAN CONVERSION
IR CONTROL
KEYBOARD CONTROL
MONITOR ID
DDC/CI
ADVANCED OPTION RESET
MODE1
ON
NORMAL
UNLOCK
ON
NO
Input Resolution: sets the resolution of the VGA input. This is only required when the monitor is unable to detect the
VGA input resolution correctly. Options include: 1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, 640 x 480, 720 x 480,
852 x 480, 800 x 600, 1064 x 600, 720 x 576, 1400 x1050, 1680 x 1050, 720 x 400, 640 x 400, 1440 x 900, 1600 x 900
and Auto.
Gamma Selection: adjusts the gamma value of the image and optimizes image brightness and contrast. Options
include: Mode 1, Mode 2, Mode 3.
Over scan: removes noise around the edges of a video image. Options include: On and Off (default).
Scan Conversion: adjusts the conversion of source images. Options include: Interlace and Progressive (recommended).
IR Control: disables and enables the IR sensor on the monitor. Options include: Normal (default; IR is enabled) and Lock
(IR is disabled).
Keypad Control: disables and enables the keypad on the right-hand side of the monitor. Options include: Lock (keypad
is disabled) and Unlock (default; keypad is enabled).
Monitor ID: set the identification number of the monitor via the RS232C connection. Each monitor must have a unique
identification number when multiple monitors are connected. Range: 1-26. (Default; 1)
DDC/CI: enables and disables DDC/CI communication. Options include: On (default) and Off.
Advanced Option Reset: resets all Advanced Option menu items to factory default settings. Options: Yes and No.