Filter
Top Products
57
Insignia 32" LED TV
www.insigniaproducts.com
Labeling an input source
You can add a label to an input source to make it
easier to identify.
To label an input source:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Input Labels, then
press ENTER. The SETTINGS · INPUT LABELS
screen opens with the input source field
highlighted.
4 Press
S
or
T
to select the input source you want
to label, then press
X
to move to the label field.
5 Press
S
or
T
to select a character, then press
W
or
X
to move to the previous or next character
position. Repeat this step to enter additional
characters.
6 When you have completed the label, press
ENTER.
7 Press MENU to save your label and return to the
previous menu. The next time you press INPUT,
your label will appear in the INPUT SOURCE list.
8 Press EXIT to close the menu.
Using INlink
INlink lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use INlink, you must set the INlink Control setting
on the SETTINGS-INLINK menu to On.
Turning INlink on or off
To turn INlink on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
S
or
T
to highlight INlink Control, then
press ENTER.
5 Press
S
or
T
to highlight On or Off, then press
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your
TV.
• The connected device’s HDMI CEC
feature must be turned on.
• If you connect an HDMI device that is
not HDMI CEC-compatible, all the
INlink Control features do not work.
• Depending on the connected HDMI
device, the INlink Control feature
may not work.